How To Apply Sistaco Classic?

Answer

Verified

337k+ Views

To apply Sistaco Classic, follow these steps:

Step 1
Wash nails with oil free soap or prep pad to remove any oils and residue. Dry thoroughly. Lightly buff the nail bed to extend wear.

Step 2
Apply a thin layer of Sistaco Base Coat to the nail while avoiding the skin. Apply your Base Coat by starting at the middle of the nail and pushing the Coat out towards the cuticle; use a light scrubbing motion which will get the Base Coat better secured to the nail plate. Make sure you only apply a light coating. After application, the base coat should look smooth.

Step 3
Connect your LED Lamp (remove blue film if first use), press and hold the button for approx. 3 seconds and set your nails under the lamp until it automatically turns off. This should be 2 mins. Your nail should not be completely dry at this point as your powder needs something to adhere to.

Step 4
For Mineral Bond Applicator:
Gently dip applicator vertically into the powder to evenly coat the sponge. Lightly apply to the nail from base to tip in light strokes. Continue until powder covers the Base Coat. Do not rub back and forth.
For Brush/Pad Applicator:
Gently dip the brush into the powder. Lightly brush powder on to the nail from base to tip in light strokes. Continue until powder covers the Base Coat. Do not rub back and forth.

Step 5
Gently apply a thin layer of Top Coat, making sure there is enough Top Coat on the applicator that you do not pull powder from the nail. Apply with a light touch.

Step 6
Press and hold the button on the LED lamp for aprox. 3 seconds and set your nails until LED automatically turns off. Brush away any excess powder using the Sistaco 3-Way brush and apply Sistaco Elixir to help with longevity and condition.. Now show off your flawless nails!

After completion, enjoy your long-lasting, stunning nails!
Explore our classic nail colors